Description
The R2010 takes into account the varying budgetary, interface and connectivity requirements of customers to create a simple and cost-competitive networking solution for customers deploying IoT solutions in industrial environments such as water, gas, electricity, factory automation and warehousing.
The R2010 runs on Robustel’s own Linux based Operating System, RobustOS. Developed entirely in-house, this gives way to a very high standard of technical support and high reliability. Robustel offers a Software Development Kit (SDK) to allow additional customization by using C, C++. It also provides rich Apps to meet fragmented IoT market demands such as:
RobustVPN
Highly flexible hosted VPN service so customers can easily enjoy a “fixed IP Gateway”
Data-Guard
Invaluable failsafe in case of a system failure and runaway data usage
Smart Reboot
SMS tool to push roaming SIMs from a non-working to working state
Smart Roaming
Provides you with device-assisted intelligent network selection for roaming SIMs to improve performance and reduce risk.
- Dual-SIM redundancy for continuous cellular network connections
- Link Manager supports Cellular WAN, Ethernet WAN, WLAN WAN link backup and ICMP detection
- WAN – Static/DHCP Client
- RobustOS + SDK + Apps
- IPsec/OpenVPN/GRE/Wireguard VPN capabilities
- Management and maintenance via Web/RCMS Cloud
- Auto reboot via SMS/time schedule
- Robust industrial design (9 to 36 V DC, desktop or wall mounting or DIN rail mounting)
Cellular Interface | |
Number of antennas | 2 (MAIN + AUX) or 1 (MAIN) |
Connector | SMA-K |
SIM | 2 Mini SIMs (2FF) |
Ethernet Interface | |
Number of ports | 2 x 10/100 Mbps, 2 x LAN or 1 x LAN + 1 x WAN |
WAN port | Supports 802.3at PD feature (optional) |
Magnet isolation protection | 1.5 KV |
Wi–Fi Interface | |
Number of antennas | 2 (Wi-Fi1 + Wi-Fi2) |
Connector | RP-SMA-K |
Standards | 802.11 b/g/n, supporting AP and Client modes |
Frequency bands | 2.4 GHz |
Security | WEP, WPA, WPA2 |
Encryption | 64/128 AES, TKIP |
Data speed | 2 x 2 MIMO, 300 Mbps |
DI/DO | |
Type | 1 x DI, 1 x DO |
Connector | 1 x 4-pin 3.5 mm female socket |
Signal definition
|
DI+, DI-, DO+, DO- |
Serial Interface | |
Type | RS232 or RS485 (software configurable) |
Connector | 1 x 3-pin 3.5 mm female socket |
Signal definition | RS232: TXD, RXD, GND RS485: A, B |
Others | |
Reset button | 1 x RST |
LED indicators | 1 x RUN, 1 x MDM, 1 x WIFI, 3 x RSSI |
Built-in | Watchdog, Timer |
Power Supply and Consumption | |
Connector | 2-pin 3.5 mm female socket |
Input voltage | 9 to 36 V DC |
Power consumption | Idle: 200 mA@12 V
Data link: 580 mA (peak)@12 V |
Software (Basic features of RobustOS) | |
Network protocols
|
PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, HTTPs, DNS, ARP, BGP, RIP, OSPF, NTP, SMTP, Telnet, VLAN, SSH2, DDNS, etc. |
VPN tunnel | IPsec, OpenVPN, GRE, WireGuard |
Firewall | DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control |
Remote management | Web, CLI, SMS |
Serial port | Transparent, TCP Client/Server, UDP, Modbus RTU Gateway |
SDK | |
Supported programming language
|
C, C++ |
Flash available for SDK | 16 MB |
RAM available for SDK | 64 MB |
App Center (Available Apps for RobustOS) | |
Apps* | L2TP, PPTP, DMVPN, VRRP, QoS, Captive Portal, WLAN Multi AP, SNMP, Language, RCMS |
*Request on demand. For more Apps please visit www.robustel.com. |
Physical Characteristics | |
Ingress protection | IP30 |
Housing & Weight | Metal, 350 g |
Dimensions | 127 x 82 x 30 mm |
Installations | Desktop, wall mounting and 35 mm DIN rail mounting |
Operating temperature | -35 ~ +75℃ |
Storage temperature | -40 ~ +85℃ |
Relative humidity | 5% ~ 95% |
Regulatory and Type Approvals (*In progress) | |
Environmental | RoHS 2.0 |
EMI | EN 55032 Conducted Emission class B |
EN 55032 Radiated Emission class B | |
EMS | IEC 61000-4-2 (ESD) Level 4
IEC 61000-4-3 (RS) Level 2 IEC 61000-4-4 (EFT) Level 2 IEC 61000-4-5 (Surge) Level 2 IEC 61000-4-6 (CS) Level 2 IEC 61000-4-11(DIP) |