Description
Interface Specification, GN-9231 (CC-Link NETWORK ADAPTER) | ||
Adapter Type | Slave node (CC-Link Version 1) | |
Max. Expansion Slot | 63 slots | |
I/O Data Size | System area : 16 points RX/RY : 112 points(4staion occupied) RWr/RWw : 16 points(4station occupied) |
|
Max. Network Node | 42 Node/Max | |
Baud Rate | 156/625/2500/5000/10000Kbps | |
Interface Connector | 5 Pin open connector | |
Other Serial Port | RS232 for MODBUS/RTU, Touch Pannel or IOGuide | |
Serial Configuration (RS232) | Node : 1 (Fixed) Baud Rate : 115200 (Fixed) Data bit : 8 (Fixed) Parity bit : No parity (Fixed) Stop bit : 1 (Fixed) |
|
Indicator | Node : 1 (Fixed) Baud Rate : 115200 (Fixed) Data bit : 8 (Fixed) Parity bit : No parity (Fixed) Stop bit : 1 (Fixed) |
|
Indicator | 5 LEDs 1 Green/Red, Module Status (MOD) 1 Green, Current Running Status (NET) 1 Green, Error Status (ERROR) 1 Green/Red Expansion I/O Module Statsus (IOS) 1 Green, Field Power Status 2 LEDs (each RJ45 Connector) 1 Green, Active 1 Yellow, Link |
|
Module Location | Starter module left side of G-Series system | |
Field Power Detection | About 14Vdc | |
Station class | Remote Device station | |
General Specification | ||
UL System Power | Supply voltage : 24Vdc nominal, Class2 | |
System Power | Supply voltage : 24Vdc nominal Supply voltage range : 15~30Vdc Protection : Output current limit (Min. 1.5A) Reverse polarity protection |
|
Power Dissipation | 70mA typical @ 24Vdc | |
Current for I/O Module | 1.5A @ 5Vdc(When using in ‘60℃ ~ 70 ℃’ temperature environment, the power dissipation is limited to 0.8A.) |
|
Isolation | System power to internal logic : Non-isolation System power I/O driver : Isolation |
|
UL System Power | Supply voltage : 24Vdc nominal, Class2 | |
Field Power | Supply voltage : 24Vdc nominal(Max. 30Vdc) * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification. |
|
Max. Current Field Power Contact | DC 10A Max | |
Weight | <165g | |
Module Size | 54mm x 99mm x 70mm |