Description
| Interface Specification, GN-9212 (DeviceNet Network Adapter) | ||
| Adapter Type | Group 2 Only Slave | |
| Max. Expansion Module | 63 Slots | |
| I/O Data Size | Max 128 bytes each slot | |
| Max. Length Bus Line | Max.100m@500Kbps, Max. 250m@250Kbps, Max. 500m@125Kbps | |
| Max. Network Node | 64 Nodes | |
| Baud Rate | 125Kbps(Max. 500m) 250Kbps(Max. 250m) 500Kbps(Max. 100m) |
|
| Protocol | Poll, Bit-Strobe, Cyclic, COS | |
| Node MAC ID Setup | DIP Switch | |
| Terminating Resistance Setup | DIP Switch | |
| Bus Connection | 5 Pin Open-Style Connector | |
| Other Serial Port | RS232 for MODBUS/RTU, Touch Panel or IOGuide | |
| Serial Configuration (RS232) | Node : 1 (Fixed) Baud Rate : 115200 (Fixed) Data bit : 8 (Fixed) Parity bit : No parity (Fixed) Stop bit : 1 (Fixed) |
|
| Indicator | 6 Status LEDs 1 Green/Red, Module Status (MOD) 1 Green/Red, Network Status (NET) 1 Green, Terminating Resistance Status (TER) 1 Green/Red, Expansion I/O Module Statsus (IOS) 1 Green, System Power Status 1 Green, Field Power Status |
|
| Module Location | Starter module left side of G-Series system | |
| Field Power Detection | About 14Vdc | |
| General Specification | ||
| UL System Power | Supply voltage : 24Vdc nominal, Class2 | |
| System Power | Supply voltage : 24Vdc nominal Supply voltage range : 16~30Vdc Protection : Output current limit (Min. 1.5A) Reverse polarity protection |
|
| Power Dissipation | 70mA @ 24Vdc | |
| Current for I/O Module | 1.5A @5Vdc | |
| Isolation | System power to internal logic : Non-isolation System power to I/O driver : Isolation |
|
| UL System Power | Supply voltage : 24Vdc nominal, Class2 | |
| Field Power | Supply voltage : 24Vdc typical (Max. 30Vdc) * Field Power Range is defferent depending on IO Module series. Refer to IO Module’s Specification. |
|
| Current in Jumper Contacts | DC 10A Max. | |
| Weight | 154g | |
| Module Size | 54mm x 99mm x 70mm | |
