moxa_banner
Power Substation Computers
DA-820 Series - New!
IEC 61850 native PRP/HSR computer

  • Intel Core i7 dual/quad core processor with Intel QM77 Express
    chipset
  • 2 x 204-pin SO-DIMM ECC DDR3 sockets, supporting un-buffered
    ECC DDR3 1333/1600 memory at 1333 and 1600 MT/s, 16 GB max.
  • 6 USB 2.0 ports for high speed peripherals
  • 3 PCIe x1 slots and 2 PCI slots for expansion modules1 PCIe x16 slot for an additional video card
  • Highly reliable design, supporting dual power, RAID 0/1/5/10, and PRP/HSR technology (with PRP/HSR expansion module)
  • Cybersecurity function
  • IEC 61850-3 (general requirements for electrical substation
    automation, EMC Level 4, C3, Bm)
  • IEEE 1613 compliant (environmental and testing requirements for
    communications networking devices in electric power substations)
  • IEC 60255 compliant (measuring relays and protection equipment)


DA-662A - New!
RISC 19-inch rackmount data acquisition computers with 8 to 16 serial ports, 4 Ethernet ports, USB

  • MoxaMacro 500 MHz processor
  • 128 MB RAM onboard, 32 MB flash
  • 8 to 16 software-selectable RS-232/422/485 serial ports
  • 8 to 16 jumper-configurable 1/150 kΩ pull low/high and 120 ohmtermination resistors
  • 15 kV ESD protection for all serial signals
  • Quad 10/100 Mbps Ethernet ports
  • USB and CF slots for storage expansion supported
  • Standard 19-inch rackmount installation, 1U height
  • Wide range of power input voltages from 100 to 240 VAC
  • LCM display and keypad for HMI
  • Ready-to-Run Linux OS platform
  • Robust, fanless design
  • Isolated serial port protection models available


DA-682A
X86 2U 19 inch rackmount computer with Intel® i7 CPU, 6 Gigabit Ethernet ports, 2 PCI expansion slots, fanless design
DA-682A

  • 2nd generation Intel core processors (Sandy Bridge)
  • Fanless design
  • Built-in DDR3 SDRAM and industrial DOM
  • 6 Gigabit Ethernet ports for network redundancy
  • 2 PCI expansion slots for expansion modules
  • 1 CompactFlash socket for storage expansion
  • 4 high speed, system-bootable USB 2.0 ports
  • 19 inch 2U rack-mountable case
  • 100/240 VAC power inputs
  • Ready-to-Run Linux or Windows Embedded Standard 7 platform

     
DA-685
x86 rackmount embedded computer with VGA, 2 RS-232/422/485 and 6 RS-485 serial ports, 6 LANs, CompactFlash, USB
DA-685

  • Intel Atom D510 1.66 GHz processor
  • 1 DDR2 SODIMM sockets supporting DDR2 667 up to 2 GB (max.)
  • 10/100/1000 Mbps Ethernet ports
  • 2 RS-232/422/485 serial ports (DB9 male)
  • 6 RS-485 serial ports (terminal block)
  • 2 USB 2.0 ports for high speed peripherals
  • CompactFlash socket for storage expansion
  • 1 SATA interface for hard disk drive expansion
  • EMC Level 4 certified

     
DA-710
x86-based computers with 2 serial ports, quad LANs, VGA, 4 DIs, 4 DOs, USB, and 4 peripheral expansion slots


  • Intel Celeron M 2.0 GHz processor with 533 MHz FSB
  • 1 X 200-pin DDR2 SODIMM socket, supporting DDR2 533 up to 2 GB
  • 4 PCI slots for expansion modules  
  • Quad 10/100/1000 Mbps Ethernet for network redundancy
  • 1 CompactFlash socket,  and 2 serial ATA-150 connectors for storage expansion
  • 4 USB 2.0 ports for high speed peripherals
  • Ready-to-Run Linux or WinXPe platform
  • 19-inch rackmount model, 4U high
  • Fanless Design
  • Dual 100/240 VAC/VDC power input

     
DA-683
x86-based Fanless pc with Intel Atom D510, DVI-I, 6 LANs, 2 serial ports, 4 DIs, 4 DOs, 4 USB 2.0 ports, CompactFlash, 2 peripheral expansion slots
DA-683

  • Intel Dual Core Atom D510 1.66GHz processor with 1MB L2 cache
  • DDR2 SODIMM socket, supporting DDR2 667 up to 2 GB (max.)
  • 6 10/100/1000 Mbps Ethernet ports
  • 2 RS-232 serial ports
  • 4 USB 2.0 ports for high speed peripherals
  • 4 DIs, 4 DOs
  • CompactFlash socket for storage expansion
  • 2 SATA-300 connectors for hard disk drive expansion
  • 2 PCI expansion slots for inserting expansion modules
  • IEC 61850-3 and IEEE 1613 certified (DPP-T models only)
  • IEEE 1588 supported (Linux models only)
  • Dual power input models available
  • Ready-to-run Embedded Linux, or Windows Embedded Standard 2009 platform
  • -40 to 70°C wide temperature models availa

     
DA-682
x86-based rackmount computer with VGA, 4 Gigabit Ethernet ports, 2 peripheral expansion slots, CompactFlash, USB


  • Intel Celeron M 1 GHz processor with 400/533 MHz FSB
  • Built-in DDR2 SDRAM and industrial flash disk moduleCompactFlash built in
  • Quad Gigabit Ethernet ports for network redundancy
  • Software selectable RS-232/422/485 with 2 KV isolation protection
  • PCI expansion slots for inserting expansion modules
  • 1 CompactFlash socket for storage expansion
  • USB 2.0 ports for high speed peripherals, supporting system bootup
  • 19-inch rackmount, 2U high form factor
  • 100/240 VAC/VDC power inputs
  • Ready-to-Run Linux, WinCE 6.0, or Windows XP Embedded platform
  • Fanless Design

     
DA-681
x86-based rackmount embedded computer with 4 isolated RS-232 and 8 isolated RS-485 ports, 6 LANs, VGA, CompactFlash, USB


  • Intel Celeron M 1 GHz processor with 400 MHz FSB
  • 1 x 200-pin DDR2 SODIMM socket, supporting DDR2 400 up to 1 GB (512 MB  built-in)
  • Six 10/100 Mbps Ethernet ports  
  • 1 CompactFlash socket, 1 IDE and serial ATA-150 connectors for storage expansion
  • 2 USB 2.0 ports for high speed peripherals
  • 4 RS-232 and 8 RS-485 ports with 2 KV isolation protection
  • Serial port speed from 50 bps to 921.6 Kbps, supporting nonstandard baudrates
  • Embedded Linux, WinCE 6.0, or WinXPe platform
  • Dual 100/240 VAC/VDC power input (Single power and dual power models available)
  • Fanless Design

     
DA-660
RISC-based 19-inch rackmount data acquisition computers with 8 or 16 serial ports, dual LANs


  • Intel XScale IXP-422 266 MHz processor
  • 128 MB RAM onboard, 32 MB flash
  • 8 or 16 RS-232/422/485 serial ports
  • Dual 10/100 Mbps Ethernet
  • Standard 19-inch rackmount installation, 1U height
  • Wide range of power input voltages from 100 to 240 V, both AC and DC
  • LCM display and keypad for HMI
  • Ready-to-Run Linux, Windows CE 5.0 OS platform
  • Robust, fanless design

     
DA-662-I
RISC-based 19-inch Rack-mounted Data Acquisition Embedded Computer with 16 Serial Ports, Quad LANs, PCMCIA, CompactFlash, USB


  • Intel XScale IXP-425 533 MHz processor
  • 128 MB RAM on-board, 32 MB flash disk
  • 2 KV optical protection for serial ports
  • 16 software-selectable RS-232/422/485 serial ports
  • Quad 10/100 Mbps Ethernet
  • Wide range of power input voltages from 100 to 240V, both AC and DC
  • Supports PCMCIA CardBus for WLAN 802.11b/g wireless network
  • Provides CompactFlash and USB slots for storage expansion
  • Standard 19-inch, 1U and rackmount installation
  • LCM display and keypad for HMI
  • Ready-to-Run Linux or WinCE 5.0 communication platform
  • Robust, fanless design

     
DA-662
RISC-based 19-inch rackmount data acquisition computer with 16 serial ports, quad LANs, PCMCIA, CompactFlash, USB


  • Intel XScale IXP-425 533 MHz processor
  • 128 MB RAM on-board, 32 MB flash
  • 16 software-selectable RS-232/422/485 serial ports
  • Quad 10/100 Mbps Ethernet for network redundancy
  • 15 KV ESD surge protection for all serial signals
  • Supports PCMCIA CardBus for WLAN 802.11b/g wireless network
  • CompactFlash and USB slots for storage expansion
  • Standard 19-inch rack-mount, 1U height installation
  • Wide range of power input voltages from 100 to 240 V AC/DC
  • LCM display and keypad for HMI
  • Ready-to-run Linux / Windows CE 5.0 platform
  • Robust, fanless design

     
DA-661
RISC-based 19-inch rackmount data acquisition computers with 16 serial ports, dual LANs, PCMCIA, CompactFlash, USB


  • Intel XScale IXP-425 533 MHz processor
  • 128 MB RAM on-board, 32 MB flash
  • 16 software-selectable RS-232/422/485 serial ports
  • Dual 10/100 Mbps Ethernet for network redundancy
  • 15 KV ESD protection for all serial signals
  • Supports PCMCIA CardBus for WLAN 802.11b/g wireless network
  • CompactFlash and USB slots for storage expansion
  • Standard 19-inch rackmount, 1U height installation
  • Wide range of input voltages from 100 to 240 V AC/DC
  • LCM display and keypad for HMI
  • Ready-to-run Linux or Windows CE 5.0 platform
  • Robust, fanless design

     
DA Series Expansion Modules
Expansion modules with RS-232/422/485 and RS-232/485 serial ports, 10/100M LAN and unmanaged switch ports, and PCI development kit
DA_Series_Expansion_Modules

  • PCI slots for interface expansion
  • 8 RS-232/422/485 software-selectable serial modules with isolation protection
  • 4 10/100 Mbps LAN modules
  • 8 10/100 Mbps unmanaged switch modules
  • Universal PCI expansion module
  • 8 RS-422/485 serial modules with terminal block connectors
  • Fully compatible with Moxa embedded computers that have peripheral expansion slots