moxa_banner
S7 Interfaces
IBH Link S7++
MPI® / DP / PPI - Ethernet
IBH Link S7++

  • If a S7 200® ,S7 300® or S7 400® has to be connected with a PC via Ethernet, the normal way is to take a CP / Communication processor. IBHsoftec has a more flexible solution: IBH Link S7++. If you want to connect your PC via Ethernet just take the IBH Link S7++ . It is possible to connect the IBH Link S7++ with a hub or switch or via a Crossover cable direct with your PC network card. The used protocol is standard TCP/IP, so you can control your system using VPN or a router. Of course you can also use an Internet connection. With the IBH Link S7++ online functions are possible via Profibus DP with up to 12 Mbit/s or via PPI/MPI®. The IBH Link S7++ will reduce your cost because there is no need for the CP's from Siemens nor the software Simatic Net is required.

     
IBH Link S7++ HS
MPI® / DP / PPI - Ethernet for DIN rail instalation
IBH Link S7++ HS

  • If a S7 200® ,S7 300® or S7 400® has to be connected with a PC via Ethernet, the normal way is to take a CP / Communication processor. IBHsoftec has a more flexible solution: IBH Link S7++ HS. If you want to connect your PC via Ethernet just take the IBH Link S7++ HS. It is possible to connect the IBH Link S7++ HS with a hub or switch or via a Crossover cable direct with your PC network card. The used protocol is standard TCP/IP, so you can control your system using VPN or a router. Of course you can also use an Internet connection. With the IBH Link S7++ HS online functions are possible via Profibus DP with up to 12 Mbit/s or via PPI/MPI®. The IBH Link S7++ HS will reduce your cost because there is no need for the CP's from Siemens nor the software Simatic Net is required.

     
USB-S7-Adapter (Siemens)
MP®I, DP, PPI®
USB-S7-Adapter (Siemens)

  • The USB-S7-Adaptor (Siemens) MPI®, DP, PPI® is an USB interface to the MPI®/PPI® or DP-Bus converter for programming software or HMI. The USB-S7-Adaptor (Siemens) MPI®, DP, PPI® has a 1.2m long MPI® connecting cable, which can be directly plugged into the programming socket of the CPU or at any other node in the MPI® network. The housing of the USB-S7-Adaptor (Siemens) MPI®, DP, PPI® contains a type "B" USB socket. The Adaptor can be connected to the PC via the USB cable supplied. The required power supply is normally taken from the S7-300® or S7-400® PLCs programming port. The USB-S7 -Adaptor (Siemens) MPI®, DP, PPI® can be used at any node in the MPI® bus. A driver for Windows 98/2000/XP/VISTA is supplied.

     
USB-S7-Adapter (cd)
MPI®, DP PPI®
USB-S7-Adapter (cd)
  • The USB-S7 Adaptor MPI®, DP, PPI is an USB interface to the MPI®/PPI or DP-Bus converter for programming software or HMI. The USB-S7 AdaptorMPI®, DP, PPIi has a 1.2m long MPI® connecting cable, which can be directly plugged into the programming socket of the CPU or at any other node in the MPI® network. The LCD Display shows the transmisson rate and MPI®/ DP address. The housing of the USB-S7 Adaptor MPI®, DP, PPI contains a type "B" USB socket. The Adaptor can be connected to the PC via the USB cable supplied. The USB-S7 Adaptor MPI® is powered from the PC. The USB-S7 Adaptor MPI®, DP, PPI can be used at any node in the MPI® bus. A driver for Windows 98/2000/XP is supplied.